This article will show you how to set up a geofence for your projects so that workers can only punch in while on site.
A geofence is only available when you are using the Punch Clock feature.
Follow these steps to set up your geofence:
Step 1: Click on "Timekeeping" from the left side menu and then click "Settings" in the top right
Step 2: Click "Location" located in the tabs at the top and then select "Required" in the "Punch Location Requirement" dropdown.
Once you select "Required" then you can enter the "Max Distance from Project in Kilometers". This means they have to be within that distance to punch in (e.g. 1km, 3km etc.).
When you select optional or required, it will generate a prompt on the worker's device requesting to allow Corfix to access their location.
When setting this up be sure to check the warning sign on the "Punch Location Requirement". This is notifying you that some of your project address' are not linked correctly. 
Click on the warning to have the modal pop up to tell you want projects need to be edited.
Go to the projects in the list and edit the address by selecting the drop down selection this will make sure the address is the correct one.
